I have just signed up to a download site but have not got a clue what to do once I have downloaded an A/C and what I mean by that is how due you make the zipped file useable on FS2004 thanks in advance P.S please send me answers to my email address so I can print it off and read at my lesiure my email address is markts1988@yahoo.co.uk
Thank you for the help but my computor is being daft so I have given up on it. message to the moderators you have my permission to remove this particular thread.
Full Version: Just A Question About Downloads
I havent got my email open at the moment, so I'll give the instructions here, and then you can copy and paste into any program like notepad, and then print off to read at your leisure.
Ok, if I miss anything out, just correct me guys
Firstly, open the .zip file, with Winzip preferabbly, although there are other programs out there. Winzip is free to use as a trial, but I've never registered because you just have to click 'use evaluation version' when you open it. Now, making sure that no files are selected, click 'extract' (because no files are selected it will extract all the files in the .zip file. If you selected a file, then it would only extract that one). Now, it will come up with an extract window, where there will be a path, i.e. C:\Program Files, or something along those lines. Enter, or use the browsing tool to find, a directory you want to temporarily put the files. Then click extract. Winzip will work for a few seconds, depending on the size of the .zip file. Then, go to where you extracted the file (click on my computer, C:\ etc or whatever drive you used) and find the extracted files. Now, if there is a folder there, probably named according to the aircraft downloaded, open it. Inside, there should be a folder 'Sound' 'Panel' 'Model' and 'Texture', but it might also have something like 'texture.1' 'texture.2'. Dont worry about that, thats just different liveries for your aircraft. There should also be an aircraft.cfg file and an aircraft.air file. Now, you can copy the entire containing folder to you ....FS9\Aircraft folder. So in your FS9\Aircraft folder, you should have a folder containing the model, sound, panel etc folders. This should then be done. Note, there may be another folder saying 'manual' but that is for you to read is you wish, and there may be 'gauges' and 'effects' folders, and the contents of these should be copied to the 'guages' and 'effects' folders found within your main fs9 directory.
Hope that helps, although not hugely clear. In the .zip file, there is usually a readme.txt file. Open that, and it will give you installation instructions for that aircraft. Alot of the time you can extract the whole .zip file to your fs9\aircraft folder and everything will be done. Then open up fs2004 and everything should be there
Ok, if I miss anything out, just correct me guys
Firstly, open the .zip file, with Winzip preferabbly, although there are other programs out there. Winzip is free to use as a trial, but I've never registered because you just have to click 'use evaluation version' when you open it. Now, making sure that no files are selected, click 'extract' (because no files are selected it will extract all the files in the .zip file. If you selected a file, then it would only extract that one). Now, it will come up with an extract window, where there will be a path, i.e. C:\Program Files, or something along those lines. Enter, or use the browsing tool to find, a directory you want to temporarily put the files. Then click extract. Winzip will work for a few seconds, depending on the size of the .zip file. Then, go to where you extracted the file (click on my computer, C:\ etc or whatever drive you used) and find the extracted files. Now, if there is a folder there, probably named according to the aircraft downloaded, open it. Inside, there should be a folder 'Sound' 'Panel' 'Model' and 'Texture', but it might also have something like 'texture.1' 'texture.2'. Dont worry about that, thats just different liveries for your aircraft. There should also be an aircraft.cfg file and an aircraft.air file. Now, you can copy the entire containing folder to you ....FS9\Aircraft folder. So in your FS9\Aircraft folder, you should have a folder containing the model, sound, panel etc folders. This should then be done. Note, there may be another folder saying 'manual' but that is for you to read is you wish, and there may be 'gauges' and 'effects' folders, and the contents of these should be copied to the 'guages' and 'effects' folders found within your main fs9 directory.
Hope that helps, although not hugely clear. In the .zip file, there is usually a readme.txt file. Open that, and it will give you installation instructions for that aircraft. Alot of the time you can extract the whole .zip file to your fs9\aircraft folder and everything will be done. Then open up fs2004 and everything should be there
Instead of all that C150, why not just say, "Read the readme that comes with the file"... 
because I'd already typed that all out by then, and thought 'damn. oh well....' 
. Besides, it gives him an idea about the structure of the aircraft folders in case a) the readme is dumb and just says 'look at my aircraft, its the best' or b) something goes wrong with the installation and he needs to do it manually
. Besides, it gives him an idea about the structure of the aircraft folders in case a) the readme is dumb and just says 'look at my aircraft, its the best' or b) something goes wrong with the installation and he needs to do it manually
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.